4450w, , , , , , , , " />

Diamond Core Drill

4450W Diamond Core Drill Concrete Drill Machine withStand Press, Drill Bits(108mm)

Comments Off
4450W Diamond Core Drill Concrete Drill Machine withStand Press, Drill Bits(108mm)

4450W Diamond Core Drill Concrete Drill Machine withStand Press, Drill Bits(108mm)

4450W Diamond Core Drill Concrete Drill Machine withStand Press, Drill Bits(108mm)

4450W Diamond Core Drill Concrete Drill Machine withStand Press, Drill Bits(108mm)

4450W Diamond Core Drill Concrete Drill Machine withStand Press, Drill Bits(108mm)

4450W Diamond Core Drill Concrete Drill Machine withStand Press, Drill Bits(108mm)

4450W Diamond Core Drill Concrete Drill Machine withStand Press, Drill Bits(108mm)

4450W Diamond Core Drill Concrete Drill Machine withStand Press, Drill Bits(108mm)

4450W Diamond Core Drill Concrete Drill Machine withStand Press, Drill Bits(108mm)

4450W Diamond Core Drill Concrete Drill Machine withStand Press, Drill Bits(108mm)

4450W Diamond Core Drill Concrete Drill Machine withStand Press, Drill Bits(108mm)

4450W Diamond Core Drill Concrete Drill Machine withStand Press, Drill Bits(108mm)

450W Diamond Core Drill Concrete Drill Machine w/Stand Press & Drill Bits(108mm). 4450W, 255 mm Core Drilling Machine. Is designed for diamond core drilling. Brand NEW 10 portable coring drill with a stand. The drill will cut up to 255mm (10 inch) holes in reinforced concrete, brick, stone, rock, ceramic, and fireproof materials. Drill features safety clutch and overload protection. The core drill is equipped with a personal protection switch and stand base. Cooling water connection also makes it work more sturdily. The drill is fitted with a safety clutch. A new-type tool used to drill holes on varies materials including reinforced concrete, masonry, rocks, ceramics and fire-proof materials. Suitable for equipment installation; installing water, gas and electric piping systems; civil engineering; construction of airfield runways, highways, railways, tunnels, etc. Read instructions carefully before putting into use. Keep your workplace clean and bright. Do not work in explosive environment. Do not expose electric tool in rain or wet surroundings. Stay alert and pay attentin to the operation. Do not wear loose clothing or any jewelry. Keep your hair, clothes and sleeves away. Power should be off before making any adjustment. Handled by a crank easily. Non water seal cage reduce maintenance costs. Secondary hardening gears more durable & powerful. Material lighter and steadier. Drilling diameter: 255mm (10). The largest drilling capacity. Integrated FI (residual current circuit breaker): 10mA. Water hose length: approx. 13ft, inside Ø 0.03inch. Packing size: 100 35 25 cm. Gross Weight: 27.5 kg (60.5 lb). 1 X 4450W Diamond Core Drill. 1 X Drill Bit(108mm). 1 X Ring Spanner. 1 X Monkey Wrench. 1 X Faucet Interface. 5 X Expansion Screws. 4 X Carbon Brushes. 1 X English Manual. Sign up to newsletter. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. 7:00am-13:00pm (Berlin Time). In the same day. International Buyers Please Note. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within 12-24hours. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “4450W Diamond Core Drill Concrete Drill Machine withStand Press, Drill Bits(108mm)” is in sale since Monday, September 23, 2019. This item is in the category “Business, Office & Industrial\Power Tools\Drills\Drills\Corded Drills”. The seller is “trustqueensale8″ and is located in Jenec. This item can be shipped to all countries in Europe.
  • Brand: VEVOR
  • MPN: ZCXUN009891513826927
  • Voltage (V): 230V, 50/60Hz
  • Corded/ Cordless: Corded
  • Power (W): 4450W
  • Max Drilling Diameter: 255 mm (10″)
  • Speed: 580 r/min
  • Drill bit: 108mm

Posted by admin on October 5th, 2019 :: Filed under 4450w
Tags :: , , , , , , , ,

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

Comments Off
4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

Sign up to Newsletters. 4450W Wet/Dry Diamond Core Drill Drilling Machine Ø 255mm w/Stand. Is designed for diamond core drilling. This drill will cut up to 255mm(10 inch) holes in reinforced concrete, brick, stone, rock, ceramic, and fireproof materials. Drill features safety clutch and overload protection. The core drill is fitted with a personal protection switch and Stand base. The Cooling water connection also makes it works more sturdily. The drill is fitted with a safety clutch. Brand NEW 10 portable coring drill with a stand. It’s a high quality high output unit. We’ll usually answer emails questions as soon as possible , Thanks for shopping! Handled by a Crank easily. Non water seal cage reduce maintenance costs. Secondary hardening gears more durable & powerful. Material lighter and steadier. Shank Diameter: 1-1/4 in. Dimension: 850 x 350 x 200mm. Weight: 30.64 kg. Rotate speed: 580 R/min. 1 X 4450W Rock Core Drill Machine. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. 7:00am-13:00pm (Berlin Time). In the same day. International Buyers Please Note. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within 12-24hours. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand” is in sale since Sunday, May 26, 2019. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Corded Drills”. The seller is “j4s_r2h5aqhsd-9″ and is located in Jenec. This item can be shipped to all countries in Europe.
  • Brand: VEVOR
  • MPN: JLXCX005
  • Voltage (V): 230V
  • Corded/ Cordless: Corded
  • Power (W): 4450W
  • Max Drilling Diameter: 10″;/255mm
  • Rotate speed: 580 R/min
  • Dimension: 850 x 350 x 200mm

Posted by admin on June 26th, 2019 :: Filed under 4450w
Tags :: , , , , , , , , , ,

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

Comments Off
4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand

Sign up to Newsletters. 3980W Wet/Dry Diamond Core Drill Drilling Machine Ø 205mm w/Stand. 3980W/ 205 mm Core Drilling. Is designed for diamond core drilling. This drill will cut up to 205mm(8 inch) holes in reinforced concrete, brick, stone, rock, ceramic, and fireproof materials. Drill features safety clutch and overload protection. The core drill is fitted with a personal protection switch and Stand base. The Cooling water connection also makes it works more sturdily. The drill is fitted with a safety clutch. Brand NEW 8 portable coring drill with a stand. It’s a high quality high output unit. We’ll usually answer emails questions as soon as possible , Thanks for shopping! Handled by a Crank easily. Non water seal cage reduce maintenance costs. Secondary hardening gears more durable & powerful. Material lighter and steadier. Drilling diameter: 205mm(8 inch). Max Drilling Diameter: 8. Rated Input Power: 398. Rotate speed: 750 R/min. Shank Diameter: 1-1/4 inch. Dimension: 850 x 350 x 200mm. Weight: 26.9 kg. 1 X 2400W 220V Rock Core Drill Machine. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. 7:00am-13:00pm (Berlin Time). In the same day. International Buyers Please Note. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within 12-24hours. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “4450W Wet/Dry Variable Speed Diamond Core Drill Drilling Machine Ø 255mm withStand” is in sale since Saturday, April 20, 2019. This item is in the category “Business, Office & Industrial\Industrial Tools\Drilling Tools\Drills”. The seller is “tbb_crh4guv8″ and is located in Jenec. This item can be shipped to all countries in Europe.
  • Brand: VEVOR
  • MPN: CXUNB008
  • Voltage (V): 230
  • Corded/ Cordless: Corded
  • Power (W): 3980
  • Max Drilling Diameter: 8in(205mm)
  • Rotate speed: 750r/min
  • Shank Diameter: 1-1/4 inch

Posted by admin on May 26th, 2019 :: Filed under 4450w
Tags :: , , , , , , , , , ,

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Comments Off
Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Sign up to Newsletters. 220V 6 Inch Diam. Ond Core Drill Concrete Core Machine With Stand Bits Tool Drilling. Our core drilling machine combines functionality and versatility in one device. It is ideal for lighter drilling work. First, install the screw connecting the stand and the pedestal. Before use the drill, you need to fix it. Remove the two screws on the back of the stand. Seperate the stand and the pedestal. Rotate the pedesta 180° and install the screws. Here are two ways. Choose a hollow tube according to the height of the place which need to be drilled. Put one end of the tube against the. And turn the rod reversely to fix the driller tightly, expansion bolts are not needed. Make a hole on the wall or the groud and install the bolt. Install the screw rod and the stand. Then tighten the nut. Before installing, you need to smear some grease on the drill end thread in order to discharge easily. You need to run the driller at an idle state at first. Before you install or remove the drill bot, you must be sure the drill is powered off. Drill must be connected with clean cold water. Here are the ways to inject water. Using tap water: Connecting the tap and the machine with the injecting hose. Hanging a bucket over the drill. Start the drill at an idle state. Then open the water tap. When there is water flowing from the drill, you can start drilling. At first, you need to drill slowly and increase strength gradually. After you drill deeper than 5mm, you can increase your push strength. If the drill’s rotating speed decrease, than proves that the drill is overloaded. Then you need to decrease the push strength, avoiding the drill being stuck. If there is smoke coming out, you must pull out the drill right away and start. To drill after a while, avoiding the engine being burn down. When drilling reinforced concrete, current increases and the drill will vibrate. Therefore, you need to decrease pushing strength but the decreasing amplitude should not be too big. Otherwise, the effiency will be affected and the drill bit will be worn more badly. When drilling reinforced concrete containing little grains of sand and small stones, the drill may be overloaded suddenly and the drill be powered off automatically. At this time, you need to pull out the drill right away and clean the hole you drilled before you start again. When you drill woof board and thick pitch, you also need to decrease pushing and drill slowly. 6Taking out drill core. When you are going yo drill through the board or wal, you need to slow down, avoiding the drill bit being stuck. If the drill bit is stuck, you need to power off the drill immediately pull out the bit and clean it. Fetch out the drill core. Install the drill bit and start again. Attention: You should be careful when taking out the drill bit, noting damaing it. Then you need to tighten the screws to adjust the distance. At the same time, you need to make sure that the pedestal and the stand is connected firmly. This drill can be used on brick, stone, reinforced concrete, rock, and fireproof materials. Water connection with hose approx. Overload protection / slip clutch. Drill bit Ø 4.25inch /13.7inch long. 1/2 BSP threaded connection for drill bits. 2 inch mandrel on stand for quick release. The biggest drill dual purpose. 1980W infinitely variable speeds. Non water seal cage reduce maintenance costs. Aluminum alloy material ligher and steadier. Suitable for sampling concrete, cement, brick, bituminous pavement and block. Rated input power: 1980W. The largest drilling capacity: 160mm. No-load speed: 0-980 r/min. Integrated FI (residual current circuit breaker): 10mA. Water hose length: approx. 13ft, inside Ø 0.03inch. 1 X Diamond Core Drill. 1 X Drill Bit(108mm). 1 X Ring Spanner. 1 X Monkey Wrench. 1 X Faucet Interface. 5 X Expansion Screws. 2 X Carbon Brushes. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. 7:00am-13:00pm (Berlin Time). In the same day. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Bremen, DE. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT” is in sale since Tuesday, October 31, 2017. This item is in the category “Business, Office & Industrial\Power Tools\Drills\Drill Bits & Accessories\Drill Bits”. The seller is “besttoolsale_1″ and is located in Jenec. This item can be shipped to all countries in Europe.
  • Brand: VEVOR
  • MPN: CXZZC0050
  • Voltage (V): 220V
  • Corded/ Cordless: Corded
  • Power (W): 1980W
  • Color: Red
  • Speed: 0-980 r/min
  • Drill bit: 4.7inch
  • Total height: approx 30inch
  • Drilling distance: approx. 19inch

Posted by admin on June 8th, 2018 :: Filed under diamond
Tags :: , , , , , , , , ,

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Comments Off
Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Sign up to Newsletters. 220V 6 Inch Diam. Ond Core Drill Concrete Core Machine With Stand Bits Tool Drilling. Our core drilling machine combines functionality and versatility in one device. It is ideal for lighter drilling work. First, install the screw connecting the stand and the pedestal. Before use the drill, you need to fix it. Remove the two screws on the back of the stand. Seperate the stand and the pedestal. Rotate the pedesta 180° and install the screws. Here are two ways. Choose a hollow tube according to the height of the place which need to be drilled. Put one end of the tube against the. And turn the rod reversely to fix the driller tightly, expansion bolts are not needed. Make a hole on the wall or the groud and install the bolt. Install the screw rod and the stand. Then tighten the nut. Before installing, you need to smear some grease on the drill end thread in order to discharge easily. You need to run the driller at an idle state at first. Before you install or remove the drill bot, you must be sure the drill is powered off. Drill must be connected with clean cold water. Here are the ways to inject water. Using tap water: Connecting the tap and the machine with the injecting hose. Hanging a bucket over the drill. Start the drill at an idle state. Then open the water tap. When there is water flowing from the drill, you can start drilling. At first, you need to drill slowly and increase strength gradually. After you drill deeper than 5mm, you can increase your push strength. If the drill’s rotating speed decrease, than proves that the drill is overloaded. Then you need to decrease the push strength, avoiding the drill being stuck. If there is smoke coming out, you must pull out the drill right away and start. To drill after a while, avoiding the engine being burn down. When drilling reinforced concrete, current increases and the drill will vibrate. Therefore, you need to decrease pushing strength but the decreasing amplitude should not be too big. Otherwise, the effiency will be affected and the drill bit will be worn more badly. When drilling reinforced concrete containing little grains of sand and small stones, the drill may be overloaded suddenly and the drill be powered off automatically. At this time, you need to pull out the drill right away and clean the hole you drilled before you start again. When you drill woof board and thick pitch, you also need to decrease pushing and drill slowly. 6Taking out drill core. When you are going yo drill through the board or wal, you need to slow down, avoiding the drill bit being stuck. If the drill bit is stuck, you need to power off the drill immediately pull out the bit and clean it. Fetch out the drill core. Install the drill bit and start again. Attention: You should be careful when taking out the drill bit, noting damaing it. Then you need to tighten the screws to adjust the distance. At the same time, you need to make sure that the pedestal and the stand is connected firmly. This drill can be used on brick, stone, reinforced concrete, rock, and fireproof materials. Water connection with hose approx. Overload protection / slip clutch. Drill bit Ø 4.25inch /13.7inch long. 1/2 BSP threaded connection for drill bits. 2 inch mandrel on stand for quick release. The biggest drill dual purpose. 1980W infinitely variable speeds. Non water seal cage reduce maintenance costs. Aluminum alloy material ligher and steadier. Suitable for sampling concrete, cement, brick, bituminous pavement and block. Rated input power: 1980W. The largest drilling capacity: 6inch. Drill bit: 4.25inch. No-load speed: 0-980 r/min. Integrated FI (residual current circuit breaker): 10mA. Water hose length: approx. 13ft, inside Ø 0.03inch. 1 X Diamond Core Drill. 1 X Drill Bit(108mm). 1 X Ring Spanner. 1 X Monkey Wrench. 1 X Faucet Interface. 5 X Expansion Screws. 2 X Carbon Brushes. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. 7:00am-13:00pm (Berlin Time). In the same day. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Bremen, DE. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT” is in sale since Thursday, September 14, 2017. This item is in the category “Business, Office & Industrial\Power Tools\Drills\Drill Bits & Accessories\Drill Bits”. The seller is “doubletreesale-3″ and is located in Jenec. This item can be shipped to all countries in Europe.
  • Brand: Vevor porte-film
  • MPN: UNBSU0080
  • Voltage (V): 220V
  • Corded/ Cordless: Corded
  • Power (W): 1980W
  • Color: Red
  • Speed: 0-980 r/min
  • Drill bit: 4.25inch
  • Total height: approx 30inch
  • Drilling distance: approx. 19inch

Posted by admin on March 3rd, 2018 :: Filed under diamond
Tags :: , , , , , , , , ,

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Comments Off
Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

220V 6 Inch Diam. Ond Core Drill Concrete Core Machine With Stand Bits Tool Drilling. Our core drilling machine combines functionality and versatility in one device. It is ideal for lighter drilling work. First, install the screw connecting the stand and the pedestal. Before use the drill, you need to fix it. Remove the two screws on the back of the stand. Seperate the stand and the pedestal. Rotate the pedesta 180° and install the screws. Here are two ways. Choose a hollow tube according to the height of the place which need to be drilled. Put one end of the tube against the. And turn the rod reversely to fix the driller tightly, expansion bolts are not needed. Make a hole on the wall or the groud and install the bolt. Install the screw rod and the stand. Then tighten the nut. Before installing, you need to smear some grease on the drill end thread in order to discharge easily. You need to run the driller at an idle state at first. Before you install or remove the drill bot, you must be sure the drill is powered off. Drill must be connected with clean cold water. Here are the ways to inject water. Using tap water: Connecting the tap and the machine with the injecting hose. Hanging a bucket over the drill. Start the drill at an idle state. Then open the water tap. When there is water flowing from the drill, you can start drilling. At first, you need to drill slowly and increase strength gradually. After you drill deeper than 5mm, you can increase your push strength. If the drill’s rotating speed decrease, than proves that the drill is overloaded. Then you need to decrease the push strength, avoiding the drill being stuck. If there is smoke coming out, you must pull out the drill right away and start. To drill after a while, avoiding the engine being burn down. When drilling reinforced concrete, current increases and the drill will vibrate. Therefore, you need to decrease pushing strength but the decreasing amplitude should not be too big. Otherwise, the effiency will be affected and the drill bit will be worn more badly. When drilling reinforced concrete containing little grains of sand and small stones, the drill may be overloaded suddenly and the drill be powered off automatically. At this time, you need to pull out the drill right away and clean the hole you drilled before you start again. When you drill woof board and thick pitch, you also need to decrease pushing and drill slowly. 6Taking out drill core. When you are going yo drill through the board or wal, you need to slow down, avoiding the drill bit being stuck. If the drill bit is stuck, you need to power off the drill immediately pull out the bit and clean it. Fetch out the drill core. Install the drill bit and start again. Attention: You should be careful when taking out the drill bit, noting damaing it. Then you need to tighten the screws to adjust the distance. At the same time, you need to make sure that the pedestal and the stand is connected firmly. This drill can be used on brick, stone, reinforced concrete, rock, and fireproof materials. Water connection with hose approx. Overload protection / slip clutch. Drill bit Ø 4.25inch /13.7inch long. 1/2 BSP threaded connection for drill bits. 2 inch mandrel on stand for quick release. The biggest drill dual purpose. 1980W infinitely variable speeds. Non water seal cage reduce maintenance costs. Aluminum alloy material ligher and steadier. Suitable for sampling concrete, cement, brick, bituminous pavement and block. Rated input power: 1980W. The largest drilling capacity: 6inch. Drill bit: 4.25inch. No-load speed: 0-980 r/min. Integrated FI (residual current circuit breaker): 10mA. Water hose length: approx. 13ft, inside Ø 0.03inch. 1 X Diamond Core Drill. 1 X Drill Bit(108mm). 1 X Ring Spanner. 1 X Monkey Wrench. 1 X Faucet Interface. 5 X Expansion Screws. 2 X Carbon Brushes. Sign up to newsletter. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. 7:00am-13:00pm (Berlin Time). In the same day. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Bremen, DE. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT” is in sale since Wednesday, March 29, 2017. This item is in the category “Business, Office & Industrial\Power Tools\Drills\Drill Bits & Accessories\Drill Bits”. The seller is “businesspleasant” and is located in Bremen. This item can be shipped to all countries in Europe, United States, Australia.
  • Brand: Vevor Kuvertiergeräte
  • MPN: 874AZ004
  • Voltage (V): 220V
  • Corded/ Cordless: Corded
  • Power (W): 1980W
  • Color: Red
  • Speed: 0-980 r/min
  • Drill bit: 4.25inch
  • Total height: approx 30inch
  • Drilling distance: approx. 19inch

Posted by admin on December 10th, 2017 :: Filed under diamond
Tags :: , , , , , , , , ,

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Comments Off
Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT

220V 6 Inch Diam. Ond Core Drill Concrete Core Machine With Stand Bits Tool Drilling. Our core drilling machine combines functionality and versatility in one device. It is ideal for lighter drilling work. First, install the screw connecting the stand and the pedestal. Before use the drill, you need to fix it. Remove the two screws on the back of the stand. Seperate the stand and the pedestal. Rotate the pedesta 180° and install the screws. Here are two ways. Choose a hollow tube according to the height of the place which need to be drilled. Put one end of the tube against the. And turn the rod reversely to fix the driller tightly, expansion bolts are not needed. Make a hole on the wall or the groud and install the bolt. Install the screw rod and the stand. Then tighten the nut. Before installing, you need to smear some grease on the drill end thread in order to discharge easily. You need to run the driller at an idle state at first. Before you install or remove the drill bot, you must be sure the drill is powered off. Drill must be connected with clean cold water. Here are the ways to inject water. Using tap water: Connecting the tap and the machine with the injecting hose. Hanging a bucket over the drill. Start the drill at an idle state. Then open the water tap. When there is water flowing from the drill, you can start drilling. At first, you need to drill slowly and increase strength gradually. After you drill deeper than 5mm, you can increase your push strength. If the drill’s rotating speed decrease, than proves that the drill is overloaded. Then you need to decrease the push strength, avoiding the drill being stuck. If there is smoke coming out, you must pull out the drill right away and start. To drill after a while, avoiding the engine being burn down. When drilling reinforced concrete, current increases and the drill will vibrate. Therefore, you need to decrease pushing strength but the decreasing amplitude should not be too big. Otherwise, the effiency will be affected and the drill bit will be worn more badly. When drilling reinforced concrete containing little grains of sand and small stones, the drill may be overloaded suddenly and the drill be powered off automatically. At this time, you need to pull out the drill right away and clean the hole you drilled before you start again. When you drill woof board and thick pitch, you also need to decrease pushing and drill slowly. 6Taking out drill core. When you are going yo drill through the board or wal, you need to slow down, avoiding the drill bit being stuck. If the drill bit is stuck, you need to power off the drill immediately pull out the bit and clean it. Fetch out the drill core. Install the drill bit and start again. Attention: You should be careful when taking out the drill bit, noting damaing it. Then you need to tighten the screws to adjust the distance. At the same time, you need to make sure that the pedestal and the stand is connected firmly. This drill can be used on brick, stone, reinforced concrete, rock, and fireproof materials. Water connection with hose approx. Overload protection / slip clutch. Drill bit Ø 4.25inch /13.7inch long. 1/2 BSP threaded connection for drill bits. 2 inch mandrel on stand for quick release. The biggest drill dual purpose. 1980W infinitely variable speeds. Non water seal cage reduce maintenance costs. Aluminum alloy material ligher and steadier. Suitable for sampling concrete, cement, brick, bituminous pavement and block. Rated input power: 1980W. The largest drilling capacity: 6inch. Drill bit: 4.25inch. No-load speed: 0-980 r/min. Integrated FI (residual current circuit breaker): 10mA. Water hose length: approx. 13ft, inside Ø 0.03inch. 1 X Diamond Core Drill. 1 X Drill Bit(108mm). 1 X Ring Spanner. 1 X Monkey Wrench. 1 X Faucet Interface. 5 X Expansion Screws. 1 X Carbon Brush. Sign up to newsletter. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. 7:00am-13:00pm (Berlin Time). In the same day. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Bremen, DE. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “Diamond Drill Concrete Core Machine Feed Crank Core Drilling WithStand Bits HOT” is in sale since Friday, September 08, 2017. This item is in the category “Business, Office & Industrial\Power Tools\Drills\Drill Bits & Accessories\Drill Bits”. The seller is “tbb_crh4guv8″ and is located in Bremen. This item can be shipped to all countries in Europe.
  • Brand: VEVOR
  • MPN: dg7870080
  • Voltage (V): 220V
  • Corded/ Cordless: Corded
  • Power (W): 1980W
  • Color: Red
  • Speed: 0-980 r/min
  • Drill bit: 4.25inch
  • Total height: approx 30inch
  • Drilling distance: approx. 19inch

Posted by admin on November 22nd, 2017 :: Filed under diamond
Tags :: , , , , , , , , ,

Diamond Drill Concrete Core Machine Drilling Tool WithStand Bits 1980Watt GREAT

Comments Off
Diamond Drill Concrete Core Machine Drilling Tool WithStand Bits 1980Watt GREAT

Diamond Drill Concrete Core Machine Drilling Tool WithStand Bits 1980Watt GREAT

Diamond Drill Concrete Core Machine Drilling Tool WithStand Bits 1980Watt GREAT

Diamond Drill Concrete Core Machine Drilling Tool WithStand Bits 1980Watt GREAT

Diamond Drill Concrete Core Machine Drilling Tool WithStand Bits 1980Watt GREAT

Diamond Drill Concrete Core Machine Drilling Tool WithStand Bits 1980Watt GREAT

Diamond Drill Concrete Core Machine Drilling Tool WithStand Bits 1980Watt GREAT

Diamond Drill Concrete Core Machine Drilling Tool WithStand Bits 1980Watt GREAT

Diamond Drill Concrete Core Machine Drilling Tool WithStand Bits 1980Watt GREAT

Diamond Drill Concrete Core Machine Drilling Tool WithStand Bits 1980Watt GREAT

Diamond Drill Concrete Core Machine Drilling Tool WithStand Bits 1980Watt GREAT

Diamond Drill Concrete Core Machine Drilling Tool WithStand Bits 1980Watt GREAT

Sign up to Newsletters. 220V 6 Inch Diam. Ond Core Drill Concrete Core Machine With Stand Bits Tool Drilling. Our core drilling machine combines functionality and versatility in one device. It is ideal for lighter drilling work. First, install the screw connecting the stand and the pedestal. Before use the drill, you need to fix it. Remove the two screws on the back of the stand. Seperate the stand and the pedestal. Rotate the pedesta 180° and install the screws. Here are two ways. Choose a hollow tube according to the height of the place which need to be drilled. Put one end of the tube against the. And turn the rod reversely to fix the driller tightly, expansion bolts are not needed. Make a hole on the wall or the groud and install the bolt. Install the screw rod and the stand. Then tighten the nut. Before installing, you need to smear some grease on the drill end thread in order to discharge easily. You need to run the driller at an idle state at first. Before you install or remove the drill bot, you must be sure the drill is powered off. Drill must be connected with clean cold water. Here are the ways to inject water. Using tap water: Connecting the tap and the machine with the injecting hose. Hanging a bucket over the drill. Start the drill at an idle state. Then open the water tap. When there is water flowing from the drill, you can start drilling. At first, you need to drill slowly and increase strength gradually. After you drill deeper than 5mm, you can increase your push strength. If the drill’s rotating speed decrease, than proves that the drill is overloaded. Then you need to decrease the push strength, avoiding the drill being stuck. If there is smoke coming out, you must pull out the drill right away and start. To drill after a while, avoiding the engine being burn down. When drilling reinforced concrete, current increases and the drill will vibrate. Therefore, you need to decrease pushing strength but the decreasing amplitude should not be too big. Otherwise, the effiency will be affected and the drill bit will be worn more badly. When drilling reinforced concrete containing little grains of sand and small stones, the drill may be overloaded suddenly and the drill be powered off automatically. At this time, you need to pull out the drill right away and clean the hole you drilled before you start again. When you drill woof board and thick pitch, you also need to decrease pushing and drill slowly. 6Taking out drill core. When you are going yo drill through the board or wal, you need to slow down, avoiding the drill bit being stuck. If the drill bit is stuck, you need to power off the drill immediately pull out the bit and clean it. Fetch out the drill core. Install the drill bit and start again. Attention: You should be careful when taking out the drill bit, noting damaing it. Then you need to tighten the screws to adjust the distance. At the same time, you need to make sure that the pedestal and the stand is connected firmly. This drill can be used on brick, stone, reinforced concrete, rock, and fireproof materials. Water connection with hose approx. Overload protection / slip clutch. Drill bit Ø 4inch /13.7inch long. 1/2 BSP threaded connection for drill bits. 2 inch mandrel on stand for quick release. The biggest drill dual purpose. 1980W infinitely variable speeds. Non water seal cage reduce maintenance costs. Aluminum alloy material ligher and steadier. Suitable for sampling concrete, cement, brick, bituminous pavement and block. Rated input power: 1980W. The largest drilling capacity: 6inch. Drill bit: 4.7inch. No-load speed: 0-980 r/min. Integrated FI (residual current circuit breaker): 10mA. Water hose length: approx. 13ft, inside Ø 0.03inch. 1 X Diamond Core Drill. 1 X Drill Bit(120mm). As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. 7:00am-13:00pm (Berlin Time). In the same day. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We are located in Bremen, DE. All emails will be responded to within. You need to change your order ex. You want to check/help track your package. You Receive a Broken or Incomplete Item. General non-technical questions about items and auctions. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Bremen, DE. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “Diamond Drill Concrete Core Machine Drilling Tool WithStand Bits 1980Watt GREAT” is in sale since Saturday, August 05, 2017. This item is in the category “Business, Office & Industrial\Power Tools\Drills\Drill Bits & Accessories\Drill Bits”. The seller is “industrysky” and is located in Bremen. This item can be shipped to all countries in Europe, United States, Australia.
  • Brand: VEVOR Pop-Up
  • MPN: NBSUG006
  • Voltage (V): 220V
  • Corded/ Cordless: Corded
  • Power (W): 1980W
  • Color: Red
  • Speed: 0-980 r/min
  • Drill bit: 4.7inch
  • Total height: approx 30inch
  • Drilling distance: approx. 19inch

Posted by admin on August 23rd, 2017 :: Filed under diamond
Tags :: , , , , , , , , , ,

Diamond Drill Concrete Core Machine Feed Crank WithStand Bits Boring Punch NEWEST

Comments Off
Diamond Drill Concrete Core Machine Feed Crank WithStand Bits Boring Punch NEWEST

Diamond Drill Concrete Core Machine Feed Crank WithStand Bits Boring Punch NEWEST

Diamond Drill Concrete Core Machine Feed Crank WithStand Bits Boring Punch NEWEST

Diamond Drill Concrete Core Machine Feed Crank WithStand Bits Boring Punch NEWEST

Diamond Drill Concrete Core Machine Feed Crank WithStand Bits Boring Punch NEWEST

Diamond Drill Concrete Core Machine Feed Crank WithStand Bits Boring Punch NEWEST

Diamond Drill Concrete Core Machine Feed Crank WithStand Bits Boring Punch NEWEST

Diamond Drill Concrete Core Machine Feed Crank WithStand Bits Boring Punch NEWEST

Diamond Drill Concrete Core Machine Feed Crank WithStand Bits Boring Punch NEWEST

Diamond Drill Concrete Core Machine Feed Crank WithStand Bits Boring Punch NEWEST

Diamond Drill Concrete Core Machine Feed Crank WithStand Bits Boring Punch NEWEST

Diamond Drill Concrete Core Machine Feed Crank WithStand Bits Boring Punch NEWEST

Sign up to Newsletters. 220V 6 Inch Diam. Ond Core Drill Concrete Core Machine With Stand Bits Tool Drilling. Our core drilling machine combines functionality and versatility in one device. It is ideal for lighter drilling work. First, install the screw connecting the stand and the pedestal. Before use the drill, you need to fix it. Remove the two screws on the back of the stand. Seperate the stand and the pedestal. Rotate the pedesta 180° and install the screws. Here are two ways. Choose a hollow tube according to the height of the place which need to be drilled. Put one end of the tube against the. And turn the rod reversely to fix the driller tightly, expansion bolts are not needed. Make a hole on the wall or the groud and install the bolt. Install the screw rod and the stand. Then tighten the nut. Before installing, you need to smear some grease on the drill end thread in order to discharge easily. You need to run the driller at an idle state at first. Attention: Before you install or remove the drill bot, you must be sure the drill is powered off. Drill must be connected with clean cold water. Here ar the ways to inject water. Using tap water: Connecting the tap and the machine with the injecting hose. Hanging a bucket over the drill. Start the drill at an idle state. Then open the water tap. When there is water flowing from the drill, you can start drilling. At first, you need to drill slowly and increase strength gradually. After you drill deeper than 5mm, you can increase your push strength. If the drill’s rotating speed decrease, than proves that the drill is overloaded. Then you need to decrease the push strength, avoiding the drill being stuck. If there is smoke coming out, you must pull out the drill right away and start. To drill after a while, avoiding the engine being burn down. When drilling reinforced concrete, current increases and the drill will vibrate. Therefore, you need to decrease pushing strength but the decreasing amplitude should not be too big. Otherwise, the effiency will be affected and the drill bit will be worn more badly. When drilling reinforced concrete containing little grains of sand and small stones, the drill may be overloaded suddenly and the drill be powered off automatically. At this time, you need to pull out the drill right away and clean the hole you drilled before you start again. When you drill woof board and thick pitch, you also need to decrease pushing and drill slowly. 6Taking out drill core. When you are going yo drill through the board or wal, you need to slow down, avoiding the drill bit being stuck. If the drill bit is stuck, you need to power off the drill immediately pull out the bit and clean it. Fetch out the drill core. Install the drill bit and start again. Attention: You should be careful when taking out the drill bit, noting damaing it. Then you need to tighten the screws to adjust the distance. At the same time, you need to make sure that the pedestal and the stand is connected firmly. This drill can be used on brick, stone, reinforced concrete, rock, and fireproof materials. Water connection with hose approx. Overload protection / slip clutch. Drill bit Ø 4inch /13.7inch long. 1/2 BSP threaded connection for drill bits. 2 inch mandrel on stand for quick release. The biggest drill dual purpose. 1980W infinitely variable speeds. Non water seal cage reduce maintenance costs. Aluminum alloy material ligher and steadier. Suitable for sampling concrete, cement, brick, bituminous pavement and block. Rated input power: 1980W. The largest drilling capacity: 6inch. Drill bit: 4.7inch. No-load speed: 0-980 r/min. Integrated FI (residual current circuit breaker): 10mA. Water hose length: approx. 13ft, inside Ø 0.03inch. 1 X Diamond Core Drill. 1 X Drill Bit(120mm). As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. 7:00am-13:00pm (Berlin Time). In the same day. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We are located in Bremen, DE. All emails will be responded to within. You need to change your order ex. You want to check/help track your package. You Receive a Broken or Incomplete Item. General non-technical questions about items and auctions. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Bremen, DE. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “Diamond Drill Concrete Core Machine Feed Crank WithStand Bits Boring Punch NEWEST” is in sale since Wednesday, March 29, 2017. This item is in the category “Business, Office & Industrial\Power Tools\Drills\Drill Bits & Accessories\Drill Bits”. The seller is “qiandingzhensatisfaction” and is located in Bremen. This item can be shipped to all countries in Europe, United States, Australia.
  • Sub-Type: Concrete Core Machine
  • Type: Diamond Core Drill
  • Brand: VEVOR Pyramids
  • MPN: Does Not Apply
  • Length: 30inch
  • Voltage (V): 220V
  • Power (W): 1980W
  • Corded/ Cordless: Corded
  • Diameter: 120mm

Posted by admin on June 13th, 2017 :: Filed under diamond
Tags :: , , , , , , , , , , ,